synergyhaa.blogg.se

1. Wideband sensor binary editor full#
2. Wideband sensor binary editor software#
3. Wideband sensor binary editor windows#

Wideband sensor binary editor software#

Note that the Mykonos transceiver evaluation software (MTES) and DPD graphical user interface (GUI) software are not compatible with the ADRV-DPD1/PCBZ.įull specifications on the AD9375 are available in the AD9375 data sheet available from Analog Devices, Inc., and must be consulted in conjunction with this user guide when using the evaluation board. The AD9375 small cell evaluation software (SCES), AD9375 Small Cell Radio Reference Design Evaluation Software GUI, can configure and control the ADRV-DPD1/PCBZ board. The radio board is designed to be used with the dual connector interposer board to interface with the EVAL-TPG-ZYNQ3 or other Xilinx ® or Avnet evaluation boards for the Xilinx Zynq ™-7000 field programmable gate array (FPGA) platform, which has a dual core ARM Cortex ®-A9 processor running a Linux ® variant. The ADRV-DPD1/PCBZ is a 24 dBm per path, 2 × 2 multiple input, multiple output (MIMO) radio board, which uses the AD9375, a highly integrated radio frequency (RF) transceiver with integrated digital predistortion (DPD). This board is primarily intended to provide RF engineers with the ability to connect the AD9371 to an RF test bench (Vector Signal Analyzer, Signal Generator, etc.) and achieve its optimum performance.

It will exhibit diminished RF performance on tuned RF frequencies outside of this band. The ADRV9371-N/PCBZ is optimized for performance over a narrow tuning range1.8GHz – 2.6GHz. All peripherals necessary for the radio card to operate including a high efficiency switcher only power supply solution, and a high performance clocking solution are populated on the board.īoth narrow tuning range and wide tuning range options exist. The radio cards provide hardware engineers, software engineers and system architects with a single 2x2 transceiver platform for device evaluation and rapid prototyping of radio solutions. The ADRV9371-N/PCBZ and ADRV9371-WPCBZ are radio cards designed to showcase the AD9371, a high performance wideband integrated RF transceiver intended for use in RF applications such as 4G base station, test and measurement applications and software defined radios.

Wideband sensor binary editor windows#

Windows GUI for configuration and data capture.

The following table outlines the available hardware and software tools.

Wideband sensor binary editor full#

The ADRV9008-2W/PCBZ is an evaluation kit to showcase the ADRV9008-2, offering dual transmitters with observation receiver over a tuning range 75MHz – 6GHz.ĪDRV9008/ADRV9009 Evaluation and Prototyping PlatformsĪDI provides a full set of software and hardware tools for evaluation, prototyping and reference design. The ADRV9008-1W/PCBZ is an evaluation kit to showcase the ADRV9008-1, offering dual receivers over a tuning range 75MHz – 6GHz. The objective being for designers to see waveforms, but not being concerned about the last 1dB or 1% EVM of performance. This board is primarily intended for system investigation and bringing up various waveforms from a software team before custom hardware is complete. The ADRV9009-W/PCBZ operates over a wide tuning range 75MHz – 6GHz, however the RF performance is tempered by the very wide band front end match. The ADRV9009-W/PCBZ is a single-chip TDD solution of dual receivers, dual transmitters with observation receiver. All peripherals necessary for the radio card to operate including a high efficiency switcher only power supply solution, and a high performance clocking solution are populated on the board. The radio card provides a single 2x2 transceiver platform for device evaluation and rapid prototyping of radio solutions. The ADRV9009-W/PCBZ is a radio card designed to showcase the ADRV9009, the widest bandwidth, highest performance RF integrated transceiver.